Carsten Groen's (OZ9AAR) personal place

For sale

On my webpage you will find a number of designs/products/projects I have made over the years. Some of these, I offer in limited quantities for sale. Most of the designs have all details so you are able to construct them yourself.

Below is a list of the products that I can supply, all the listed items below are complete products, assembled, tested and calibrated (if needed).

All prices are excluding shipping!

• IC-9700 PTT expander (will output three separate PTT signals, one for each band). Euro 12,-
• Flatpack2 HE interface board (interface/connector for Flatpack2 HE power supplies). Euro 52,-
• PA overcurrent protection/switch board (protects/switches high power PA):
  • Single channel: Euro 125,-
  • Dual channel: Euro 160,-
  • Quad channel: Euro 195,- 
• REPAM module (remote monitoring of PA modules via Ethernet). Euro 245,-
  • R/H sensor for REPAM (humidity/ambient temperature sensor for REPAM). Euro 30,-
• Dual RF Head Analog/USB/M5 - Dual logarithmic RF power sensor, 1MHz to 10GHz, -50 to +10 dBm:
  • Dual RF Head - Analog (Analog voltage outputs). Euro 135,-
  • Dual RF Head - USB (connects via USB-C as a virtual serial port). Euro 160,-
  • Dual RF Head - M5 Standalone power meter (standalone, attaches to M5Stack Tab5 touchscreen):
    • Option 1: Dual RF Head M5 module, you supply your own Tab5, Euro 160,-
    • Option 2: Dual RF Head M5 module including Tab5 WITHOUT battery, ready to use, Euro 220,-
    • Option 3: Dual RF Head M5 module including Tab5 OR CoreS3 WITH battery, ready to use, Euro 225,-
• 70cm low power 90 degree hybrid combiner/splitter. Euro 170,- (assembled/tested)
• 70 cm/432 MHz high power 90 degree hybrid combiner. Euro 500,- (assembled/tested) / Euro 440,- (full kit)
• 23cm low power 90 degree hybrid combiner/splitter. Euro 170,- (assembled/tested)
• 23 cm/1296 MHz high power 90 degree hybrid combiner. Euro 410,- (assembled/tested) / Euro 370,- (full kit)

• 10 MHz Clock Distribution Box. Euro 300,- (assembled and tested box, without the GPSDO. Add €75,- for GPSDO)
• CNC milled parts for W6PQL PA module, including copper heat spreader, Euro 295,- (or two sets for Euro 275,- each)
• 144 MHz-2300 MHz directional coupler (high power), Euro 245,-
• 400W attenuator, assembled/tested WITHOUT heatsink Euro 135,- suitable heatsink (see webpage) is Euro 55,-
• 1500W attenuator, assembled/tested WITHOUT heatsink Euro 300,-
• Blank PCB for the 150W 23cm PA module, Euro 5,-
• CNC milled copper heat spreader for the 150W 23cm PA module, Euro 44,-
• Centronics to USB adapter (including 3 meter long USB cable), Euro 35,-